2022 DownEaster Mfg DED11396 / DEDS11396 Other

FEATURES

GENERAL

10 gauge construction throughout

Dirt shedding , sloped design at side plate and tailgate top

Double panel side plates equal over 1/4" thickness.

Full depth 3/16"rear corner pillars incorporate recessed lighting, keyhole banjo eyes and lower tailgate pin receiver.

All lighting is LED rubber mounted and NTEA and Federal compliant.

2 1/2" shorter deck height (9' only)

Mounting height of 9.5" chassis to floor (9' only)

10" board extension pockets ease of install & future optional / custom overhang.

Self aligning rear latch release for the top gate pins

Integrated tarp hooks

DuPont(tm) Imron(r) Elite black oven cured paint w/ epoxy primer

FLOOR & UNDERSTRUCTURE

4" x 5.7# Channel long sills and 3" channel cross members (9')

6" x 8.2# Channel long sills (10', 10.5' 11')

3/16" Stainless formed 7" long sills (SS body)

3" stainless tubing, interlaced cross members (SS body)

Two piece 10 gauge floor with 45 degree slopped corners where meets seamless side plate.

Greasable Bronze bearings for underbody release mechanisms

TAILGATE

Formed 10 gauge inner, outer and end panels.

1" hardened pins, (1" Stainless) with plasma cut latch receiving lock fingers

Adjustable 1/4" chain for spreading aggregate material & holding gate in down position

CAB SHIELD

Bolt on, 10GA (12GA SS) cab protector / overhang, for ease of install & future optional / custom overhang

12" (1/4 cab) overhang, standard. (8', 9', & 11')

Pre punched tarp mounting provisions.

Slotted dual windows

OPTIONS

Stainless body construction (excluding DED0888)

24" Cab Shield (1/2 cab)

Tarp assembly, manual or spring loaded.

3/16" floor (on 9' & 10' only)

Coal chute, installed, painted or stainless

Backup, running or strobe lights in apron

-All pictures shown are for illustration purpose only. Actual product may vary.-

null